ReadyMadeRC
PENGUIN M2220 MOTOR
| Weight | 97g with x-mount, prop adapter, and screws |
| Dimensions | 28.5mm dia x 35mm length (not including x mount or shaft) |
| Shaft diameter | 4mm |
ReadyMadeRC
PENGUIN V1 M2815 MOTOR
| Weight | 140g including motor, x-mount, prop adapter, and screws |
| Dimensions | 35mm dia x 35mm length (not including x-mount, shaft, or prop adapter |
| Screw on prop adapter diameter | 5/16" |
| Shaft size | 5mm |
ReadyMadeRC
PENGUIN V2 M2815 MOTOR
| Weight | 140g including motor, x-mount, prop adapter, and screws |
| Dimensions | 35mm dia x 35mm length (not including x-mount, shaft, or prop adapter |
| Screw on prop adapter diameter | 5/16" |
| Shaft size | 5mm |
ReadyMadeRC
RP SMA MALE TO SMA MALE ADAPTER
Note: different web pages list the "gender" of SMA and RP-SMA connectors differently. Please look closely at the pictures to determine if this fits the application.,
RP-SMA Male to SMA Male Adapter.ReadyMadeRC
REGULATOR BYPASS ADAPTER FOR IMMERSIONRC TRANSMITTERS
,
Want to use an ImmersionRC or FatShark transmitter with your ...ReadyMadeRC
FEMALE TO FEMALE ADAPTER FOR IMMERSIONRC STYLE CONNECTORS
,
A male to male adapter to help with various configurations ...ReadyMadeRC
FINWING PENGUIN ADJUSTABLE MOTOR MOUNT
| Position 1 | stock height up to a 9" prop. |
| Position 2 | (+) 0.47" for up to a 10" prop. |
| Position 3 | (+) .95" for up to an 11" prop. |
| Position 4 | (+) 1.42" for up to a 12" prop. |
| Total Weight | 38g |
Installation Instructions:, Take the stock wood mount and draw 2 lines going through the existing mounting holes to form an X. This is shown in the attached photos., Included:, 1 - Penguin Base Tube and SSS Motor Plate, 4 motor screws, 4 motor plate screws, 4 base tube screws., Notes:, The stock thrust angles are retained in all 4 positions. If a change in thrust angle is desired, simply add a small washer between the motor base and motor plate at the appropriate locations., Acceptable bolt patterns (units in mm):, 19x19,
This two piece mount is CNC machined from billet aluminum. ...ReadyMadeRC
AIR TITAN KIT (HARDWARE INCLUDED) NO ELECTRONICS
| ATTENTION | According to |
| Wingspan | 2520MM/ 99.2inch |
| Kits Airplane weight | 2.4kg(5.3IB) including all reinforcement parts |
| Extra Payload | 3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg |
| Customized Motor for Airtitan | M60K/ Power 1500W |
| Testing static thrust | 5.5-6.0kg (6S, 15" Prop) |
| Propeller recommend | 15*6 / 15*7 |
| ESC | Advanced 80A OPTO (without Built-in BEC) |
| External UBEC | 5V/6A,5.5V/6A or 6V/6A (Switchable) |
| Material of fuselage and Wing | EPO |
| RMRC 6s batteries found here | 10,000 mAh |
| Main-wing | built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing |
| Control surface of Aileron and Elevator | carbon tube reinforced, no need further DIY |
Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, , Horizontal stabilizer:,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
AIR TITAN KIT (HARDWARE INCLUDED) WITH MOTOR, ESC, AND SERVOS
| ATTENTION | According to |
| Wingspan | 2520MM/ 99.2inch |
| Kits Airplane weight | 2.4kg(5.3IB) including all reinforcement parts |
| Extra Payload | 3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg |
| Customized Motor for Airtitan | M60K/ Power 1500W |
| Testing static thrust | 5.5-6.0kg (6S, 15" Prop) |
| Propeller recommend | 15*6 / 15*7 |
| ESC | Advanced 80A OPTO (without Built-in BEC) |
| External UBEC | 5V/6A,5.5V/6A or 6V/6A (Switchable) |
| Material of fuselage and Wing | EPO |
| RMRC 6s batteries found here | 10,000 mAh |
| Main-wing | built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing |
| Control surface of Aileron and Elevator | carbon tube reinforced, no need further DIY |
Breakdown for Transport:, This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. The ARF version includes an 80A OPTO ESC, Massive 1500W motor, a switch mode 5-6V adjustable UBEC, and heavy duty metal geared servos for the ailerons, elevator, and steering. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight. Available and ready to ship now at Ready Made RC, LLC, the best place to get ALL your FPV and RC equipment!, Specifications:, , Customized Brushless Power system:, Servos:, , Battery Recommendations:, , Sample Battery Setup:, , Flight Recomendations:, *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power", *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots, High Quality Reinforcement :, ,
UN1133 shipping regulations, the glue contained in t his product ...ReadyMadeRC
GEMFAN 9X4.7 SLOW FLY ELECTRIC PROPELLER ORANGE, 2PCS
,
Gemfan propellers are an excellent brand of propellers. They are ...